When fuel was cheap, excess air was used to aid temperature uniformity within a furnace load by 1)reducing the hot mix temperature, 2)preventing stratification, and […]
When fuel was cheap, excess air was used to aid temperature uniformity within a furnace load by 1)reducing the hot mix temperature, 2)preventing stratification, and […]
When fuel was cheap, excess air was used to aid temperature uniformity within a furnace load by 1)reducing the hot mix temperature, 2)preventing stratification, and […]
MNG Nozzle-Mix gas burners operate with a wider stability range than premix burners. Ease of installation, operation, and maintenance has been stressed in the MNG […]
Medium-velocity burners are the burners that the POC (products of combustion) velocity from the burner exit peaks at 40 m/s. These burners are usually used […]
Medium-velocity burners are the burners that the POC (products of combustion) velocity from the burner exit peaks at 40 m/s. These burners are usually used […]
In atmospheric burners, high-pressure gas injection from a nozzle with a specific discharge coefficient; prepares a proper vacuum in the burner venturi and air of […]
When fuel was cheap, excess air was used to aid temperature uniformity within a furnace load by 1)reducing the hot mix temperature, 2)preventing stratification, and […]
Medium-velocity burners are the burners that the POC (products of combustion) velocity from the burner exit peaks at 40 m/s. These burners are usually used […]
Self-Recuperative Burners for Gaseous Fuels include a recuperator that is integrated into the burner that preheats the incoming combustion air. Burner capacity between 20,000 to […]
CKGO burners are designed to meet the needs of the cement industry which is undergoing the process of fuel conversion and development. In the meantime, […]
RG(O) dual–fuel burner operates with gas or light oil on multi pass radiant or immersion tubes of approximately 4~6 inch ID. Ideally, the first leg […]
When fuel was cheap, excess air was used to aid temperature uniformity within a furnace load by 1)reducing the hot mix temperature, 2)preventing stratification, and […]
Medium-velocity burners are the burners that the POC (products of combustion) velocity from the burner exit peaks at 40 m/s. These burners are usually used […]
Medium-velocity burners are the burners that the POC (products of combustion) velocity from the burner exit peaks at 40 m/s. These burners are usually used […]
FGO burners provide a radial flame pattern that reduces hot-spotting and permits larger loadings of furnace or lehr. They include stable pilot for reliable light/off […]
ZFG Gas burners are ideal for lower temperature applications such as baking, drying and curing applications. standard burners include an integral combustion air blower, ignition […]
Medium-velocity burners are the burners that the POC (products of combustion) velocity from the burner exit peaks at 40 m/s. These burners are usually used […]